|
The EPM-1560T Panel Link transmitter module uses PanelLinkRR Digital technology to support displays ranging from VGA to UXGA resolutions (25 - 165 Mpps) in a single link interface. The EPM-1560T has a highly flexible interface with either a 12-bit mode (1/2 pixel per clock edge) or 24-bit mode 1-pixel/clock input for true color (16.7 million) support. In 24-bit mode, the EPM-1560T supports single or dual edge clocking. In 12-bit mode, the EPM-1560T supports dual edge single clocking or single edge dual clocking. The EPM-1560T can be programmed though an I2C interface. The EPM-1560T supports Receiver and Hot Plug Detection.
PanelLink Digital technology simplifies PC design by resolving many of the system level issues associated with high-speed mixed signal design, providing the system designer with a digital interface solution that is quicker to market and lower in cost.
特徴
- Scaleable Bandwidth: 25 - 165 Megapixels/sec (VGA to UXGA)
- Flexible Graphics Controller Interface: 12-bit (1/2 pixel) or 24-bit mode 1 pixel/clock inputs
- Flexible Input Clocking: Single clock single edge (24-bit), Single clock dual edge (12-/24-bit), Dual clock single edge (12-bit)
- Low EMI Low Voltage Interface: 3.3V with option for 1.0 to 1.8V
- Receiver Detection: Supports Hot Plug Detection
- Cable Distance Support: over 5m with twisted pair and fiber-optics ready
- Standards Compliant with DVI 1.0 (DVI is backwards compliant with VESAR P&DTM and DFP)
仕様
| General Functions |
| Chipset |
Silicon Image Sil 164 or equivalents |
| Display Type |
Supports VGA, SVGA, XGA, and UXGA |
|
| Connectors |
| Input |
40-pin Hirose DF13-40DP-1.25V connector, 8 x 2, pitch 2.54mm header |
| Output |
30-pin M1-DA DVI connector, 8 x 2, pitch 2.54mm header |
|
| Mechanical and Environmental |
| Power Supply Voltage |
+5V and +12V |
| Operating Temperature |
32 to 140 °F (0 to 60 °C) |
| Board Size |
65mm x 50mm |
|
|
